CDCLVC1112PW

CDCLVC1112PW Overview

There is a case available for the cut smart buffer in 24-TSSOP (0.173, 4.40mm Width). There is a Tube package attached to it. A total of 24 terminations can be found in it. Using a supply voltage of 2.5V allows for high efficiency. In this case, it will be mounted by Surface Mount. There is a classification of Fanout Buffer (Distribution) for this electronic part. To ensure reliable performance, the temperature should be set to -40°C~85°C. This circuit clock should be able to operate on a power supply of 2.3V~3.6V volts. It is located in the way of Surface Mount. There are 24 pins on timeing clock. Operation is performed with 24 pins. There is a family of objects known as the CDCLVC1112. A cut smart buffer of this type is contained in Clock Driver. CDC is a family of electronic gadgets. The maximum supply voltage (Vsup) has been set to 2.7V. As a general rule, the supply voltage (Vsup) should be maintained above 2.3V. As a default, it outputs 12. There is a 3.3V volt supply attached to it. As long as the frequency is 250MHz, excellent accuracy can be achieved.

CDCLVC1112PW Features

24 terminations
The operating temperature of -40°C~85°C degrees
Clock Driver subcategory
at 250MHz frequency

CDCLVC1112PW Applications

There are a lot of Texas Instruments CDCLVC1112PW Clock Buffers & Drivers applications.

• Other PCIe Gen2 networking applications
• Information equipment
• High-end consumer electronics
• Measurement test
• High speed line receiver
• Navigation equipment
• Window comparator
• Tlecom applications
• Computing
• Patient diagnosis