CDCEL913IPWRQ1

CDCEL913IPWRQ1 Overview

It is packaged using the Tape & Reel (TR) method since it is a clock IC. 14-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. There are 14 terminations found in this file. This clock generator ic should receive a voltage of 1.8V. In this case, LVCMOS, Crystal is designed to be the input of the clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. There is a maximum frequency of 230MHz Max with this clock-based frequency generator. The Surface Mount allows this electrical component to be easily installed on the panel. This clock PLL works with a supply voltage of 1.7V~1.9V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. It's compatible with LVCMOS logic levels. This is an electronic part that can be classified as a PLL Clock Synthesizer in this case. It is a 14-bit clock PLL designed specifically for microprocessors. Related electrical parts can be found for the base part number CDCEL913. There are 14 pins that are available on the clock PLL. In terms of the supply voltage, analog clock generator can handle 1.8V volts. A Clock Generators clock generator is essentially what this device is. Automotive, AEC-Q100 series electronic parts are included in this product. 3 signal outputs enable clock PLL to magnify output frequency as high as possible.

CDCEL913IPWRQ1 Features

Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 1.8V
Operating supply voltage of 1.8V

CDCEL913IPWRQ1 Applications

There are a lot of Texas Instruments CDCEL913IPWRQ1 Clock Generators applications.

• Cable television converter boxes
• 10 Gigabit Ethernet
• FMCW Radar
• Digital switching systems
• VSAT (Small Ground Satellite Station)
• HDD recorders
• Bit synchronization
• Signal modulation and demodulation
• Wireless handsets
• Mixed mode (analog and digital) applications