CDCE925PWG4

CDCE925PWG4 Overview

This clock IC is packaged using the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. In it, there are 16 terminations to be found. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called LVCMOS, Crystal and it is designed as the input for this clock generator. 1 circuits are used to achieve clock PLL's superior flexibility. This component can be conveniently installed on the panel thanks to the Surface Mount. This clock PLL works with a supply voltage of 1.7V~1.9V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. It's compatible with LVCMOS logic levels. This electronic component can be classified as a PLL Clock Generator. Clock PLL is equipped with 16 pin count. This part number CDCE925 is related to the following electrical components. There is an available 16 pin on the PLL. PLL clock can handle a voltage of 1.8V as its supply voltage. 5 signal outputs maximi5e the output frequency. High efficiency is achieved when operating at a frequency of 230MHz. The clock PLL here has 2 elements and has a very low jitter performance. This RF synthesizer operation requires a maximum current of 20mA. Using input data, this clock generator combines the logic functions of the Clock clock.

CDCE925PWG4 Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 1.8V

CDCE925PWG4 Applications

There are a lot of Texas Instruments CDCE925PWG4 Clock Generators applications.

• Sampling clocks for ADC and DAC
• Motor speed controls
• Televisions
• Clock recovery
• Remote telemetry and instrumentation
• Walkie-talkies
• CB radios
• Infotainment systems
• Frequency synthesis
• Picocells, femtocells and small cells