CDCE706PWRG4

CDCE706PWRG4 Overview

This clock IC is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. In it, there are 20 terminations to be found. For this clock generator ic, a voltage of 3.3V is required. It is designed that the Clock PLL's input should be LVCMOS, Crystal. 1 circuits are implemented to access the electronic component's full performance. There is a maximum frequency of 300MHz Max with this clock-based frequency generator. This component can be conveniently installed on the panel thanks to the Surface Mount. There should be 3V~3.6V provided with this RF synthesizer. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. It has been classified as a Spread Spectrum Clock Driver electronic part, which means that it is a semiconductor. It is a 20-bit IC that is designed for microprocessors specifically. According to the base part number, its related parts can be founded. There is an available 20 pin on the PLL. In terms of the supply voltage, PLL clock can handle 3.3V volts. 6 signal outputs enable clock PLL to magnify output frequency as high as possible. At a frequency of 54MHz, frequency generator is capable of achieving high efficiency. This is a 3-element clock generator with low jitter performance.

CDCE706PWRG4 Features

Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCE706PWRG4 Applications

There are a lot of Texas Instruments CDCE706PWRG4 Clock Generators applications.

• Radar
• Digital circuits
• Local oscillator source in receiver
• Various decoding circuits
• Set-top boxes
• High-speed optical transport network (OTN)
• Frequency shifting decodes
• Jitter reduction
• Peripheral devices
• PMR (Professional Mobile Radio)