CDCE6214TWRGETQ1

CDCE6214TWRGETQ1 Overview

The Tape & Reel (TR) method is used for packaging clock ICs. The 24-VFQFN Exposed Pad package embeds this Clock PLL. In it, there are 24 terminations to be found. This clock generator ic should receive a voltage of 1.8V. In this case, Differential or Single-Ended is designed to be the input of the clock generator. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 350MHz Max with this clock-based frequency generator. Because of the Surface Mount, Wettable Flank, clock PLL can be easily mounted on the panel. As long as there are 1.71V~3.465V supply voltages provided, clock generator ic should work. Based on the test statistics, an ambient temperature of -40°C~105°C TA should be set. I would like to present to you a frequency synthesizer that is compatible with HCSL, LVCMOS, LVDS logic levels. An electrical part such as this one can be classified as a Clock Generator component. CDCE6214 is the base part number for finding related electronic parts. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output. The Automotive, AEC-Q100 series includes this electronic part.

CDCE6214TWRGETQ1 Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V

CDCE6214TWRGETQ1 Applications

There are a lot of Texas Instruments CDCE6214TWRGETQ1 Clock Generators applications.

• Deep space exploration
• Threshold extension
• High-speed optical transport network (OTN)
• Simple clock clean-up circuits
• Signal frequency synthesis circuits
• Televisions
• Microwave backhaul IF
• Fiber Channel
• GPS systems
• Microwave radio