CDC706PWG4

CDC706PWG4 Overview

As a clock IC, PLLs is packaged using the Tube method. There is a clock generator embedded in the 20-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 20 terminations. The clock generator ic should be grounded with a voltage of 3.3V. This clock generator receives its inputs from LVCMOS, Crystal, which is designed to be the clock source. To access the electronic component's full performance, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 300MHz. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with LVCMOS logic levels. As far as electrical parts go, this component can be classified as a PLL Frequency Synthesizer component. This clock-generating IC is a 20-bit device designed explicitly for microprocessors. The related electronic parts of part number CDC706 are listed below. It is possible to connect to the PLL via 20 pins. This time clock generator can handle a voltage of 3.3V as its supply voltage. At 200MHz, frequency synthesizer achieves high efficiency. I have designed a frequency synthesizer that has 3 elements and a low amount of jitter.

CDC706PWG4 Features

Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC706PWG4 Applications

There are a lot of Texas Instruments CDC706PWG4 Clock Generators applications.

• 10 Gigabit Ethernet
• Deep space exploration
• MRI
• Bluetooth receivers
• GPS systems
• Instrument
• Computers to manage memory cards
• Smartphones
• Mechanical devices
• Sampling clocks for ADC and DAC