CDC5801DBQG4

CDC5801DBQG4 Overview

Clock generator is packaged in the way of Tube. A Clock PLL is included with the 24-SSOP (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 24 terminations can be found in frequency generators. The supply voltage of 3.3V allows for high efficiency. LVCMOS, LVTTL is designed for clock generator's input. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 500MHz. PLL clock is mounted in the way of Surface Mount. Clock generators can take up to 3.6V of power as a maximum supply voltageThe supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock PLL works with 3V~3.6V supply voltage provided. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. LVDS, LVPECL, LVTTL logic levels are supported by this RF synthesizer. An electrical part such as this one can be classified as a PLL Multiplier/Divider component. In particular, this clock PLL is designed to be used with microprocessors. The related electrical components for the base part number CDC5801 can be found below. There is an available 24 pin on the clock generators. The maximum supply voltage that clock generator can handle is 3.3V. Clock PLL is facilitated with 1 signal outputs to magnify output frequency as high as possible.

CDC5801DBQG4 Features

Available in the 24-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC5801DBQG4 Applications

There are a lot of Texas Instruments CDC5801DBQG4 Clock Generators applications.

• Signal analyzer
• Set-top boxes
• Clock recovery
• Modems
• Satellite receivers
• Telecommunication systems
• Vector network analyzers (VNA)
• Coherent detection of the signal
• Remote telemetry and instrumentation
• Automatic test equipment