CDC5801DBQ

CDC5801DBQ Overview

As a clock IC, PLLs is packaged using the Tube method. As part of the 24-SSOP (0.154, 3.90mm Width) package, this clock generator is embedded. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result of this, we can find 24 terminations. The clock generator ic should be grounded with a voltage of 3.3V. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. This component can be conveniently installed on the panel thanks to the Surface Mount. It would be possible to supply this clock PLL with 3.6V of power. A maximum voltage of 3V should be used for this frequency generator for safety reasons. In terms of supply voltage, RF synthesizer works with 3V~3.6V. The temperature should be set at -40°C~85°C to ensure reliable performance. As the name suggests, this is a clock generator that is compatible with LVDS, LVPECL, LVTTL logic levels. It is possible to classify this electronic component as a PLL Multiplier/Divider. Clock PLL is equipped with 24 pin count. According to the base part number CDC5801, its related parts can be found. There are 24 pins that are available on the clock PLL. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. As a result, it is commonly classified as a type of Clock Driver clock PLL. The output frequency is magnified as high as possible with 1 signal outputs. When operated at 500MHz, frequency synthesizer achieves high efficiency.

CDC5801DBQ Features

Available in the 24-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC5801DBQ Applications

There are a lot of Texas Instruments CDC5801DBQ Clock Generators applications.

• Ports
• Radiotelephones
• Set-top boxes
• Quenching?
• Myriad digital applications
• Media broadcast servers
• Closed circuit systems
• CB radios
• Radio receivers
• CPUs