CDC328ADR

CDC328ADR Overview

It is available in the case 16-SOIC (0.154, 3.90mm Width) for this cut smart buffer. In case Cut Tape (CT), the cut smart buffer is available. It has 16 terminations in it, which means that it is terminated. The supply voltage of 5V is capable of providing high efficiency. The circuit clock is mounted on Surface Mount. A classification of Fanout Buffer (Distribution) is assigned to this electronic part. When the temperature is set to -40°C~85°C, reliable performance is ensured. Ideally, it should be able to operate from 4.75V~5.25V volts. It is located in the way of Surface Mount. There is a pin count of 16 on timeing clock. For operation, 16 pins are used. As a member of the CDC328 family, it falls under that category. There is an embedded device in Clock Drivers containing this circuit clock. 328 is a family of electronic gadgets. There is a default setting of output 6. Power for the clock buffer comes from a 5V volt supply. For maximum efficiency, the supply voltage should be kept at 5V. As a result of utilizing this gadget, COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS is also available. A quiescent current of 40mA is consumed, and its external influences are unaffected. An excellent degree of accuracy can be maintained at a frequency of 100MHz. This method uses the TR packing method.

CDC328ADR Features

16 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 100MHz frequency

CDC328ADR Applications

There are a lot of Texas Instruments CDC328ADR Clock Buffers & Drivers applications.

• Synchronous optical network (SONET)
• High-speed flip-flop
• Data center
• Base station
• DDR4 JEDEC standard LRDIMM design
• DDR4 JEDEC standard RDIMM design
• Furniture
• Navigation equipment
• Industrial automation control system
• Synchronous digital system