CDC2536DBRG4

CDC2536DBRG4 Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. The 28-SSOP (0.209, 5.30mm Width) package contains this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. As a result, frequency synthesizers can be found to contain 28 terminations. The clock generator ic should be grounded with a voltage of 3.3V. The input of this clock generator is designed to be LVTTL. 1 circuits are implemented to access the electronic component's full performance. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There are 3V~3.6V available for use with this clock PLL. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. This electronic component can be classified as a PLL Clock Driver. Microprocessors are specifically designed to use this clock-generating IC, which has a 28-bit output. CDC2536 is the base part number for finding related electronic parts. The frequency generator is equipped with 28 pins. Time clock generator is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. 6 signal outputs allow for maximi6ation of output frequency. There is a low timing skew at 0.5 nsmax with this RF synthesizer. By operating at a frequency of 100MHz, frequency generator is able to achieve high efficiency. It is perfect for this clock generator ic to use the TR package.

CDC2536DBRG4 Features

Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC2536DBRG4 Applications

There are a lot of Texas Instruments CDC2536DBRG4 Clock Generators applications.

• Local oscillators (LOs)
• Microwave radio
• Electronic equipment
• Sampling clocks for ADC and DAC
• Closed circuit systems
• Pagers
• Modems
• GPS systems
• FPGA and processor clocks
• Coherent detection of the signal