CDC2516DGGR

CDC2516DGGR Overview

Clock ICs are packaged using the Cut Tape (CT) method. There is a clock generator embedded in the 48-TFSOP (0.240, 6.10mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. In it, there are 48 terminations to be found. The clock generator ic should be grounded with a voltage of 3.3V. In this clock generator, LVTTL is used as the input to the clock. A total of 1 circuits are implemented to access the full performance of the electrical part. PLL clock is mounted in the way of Surface Mount. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. Clock PLL works with 3V~3.6V supply voltage provided. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. PLL Clock Driver is the type of electrical part that this component is classified as. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. According to the base part number, its related parts can be founded. There are 48 pins that are available on the clock PLL. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. In general, this clock PLL is considered a Clock Drivers device. 16 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.2 ns Max, this analog clock generator exhibits low timing skew. High efficiency is achieved when operating at a frequency of 125MHz. The load capacitance is 30pF. There is no doubt that the TR package is an ideal fit for this clock generator ic.

CDC2516DGGR Features

Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 30pF

CDC2516DGGR Applications

There are a lot of Texas Instruments CDC2516DGGR Clock Generators applications.

• Local oscillator source in receiver
• Notebooks
• Frequency synthesis
• Line cards used in telephone exchange
• Cellular/4G
• Signal analyzer
• Radio receivers
• Various decoding circuits
• Sampling clocks for ADC and DAC
• Wireless base station for LTE, LTE-advanced