CDC2510CPWRG4

CDC2510CPWRG4 Overview

Tape & Reel (TR)-method packaging is used for clock ICs. As part of the 24-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 24 terminations. This time clock generator should be voltaged at 3.3V. It is designed that the Clock PLL's input should be Clock. 1 circuits are used to achieve clock PLL's superior flexibility. PLL clock is mounted in the way of Surface Mount. Clock generators can take up to 3.6V of power as a maximum supply voltageKeeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. As long as you provide 3V~3.6V supply voltage, it will work. Statistics suggest that the ambient temperature be set at 0°C~85°C, which is what is estimated by the test. A PLL Clock Driver is a classification for the electronic part in question. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. You can find related electrical components to the base part number CDC2510. A 24 pin is available on the clock PLL. The maximum supply voltage that clock generator can handle is 3.3V. The output frequency can be amplified as high as possible with its 10 signal outputs. There is a low timing skew at 0.2 nsmax with this RF synthesizer. At frequencies of 125MHz, RF synthesizer achieves high efficiency.

CDC2510CPWRG4 Features

Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC2510CPWRG4 Applications

There are a lot of Texas Instruments CDC2510CPWRG4 Clock Generators applications.

• High-speed optical transport network (OTN)
• Various decoding circuits
• Signal frequency synthesis circuits
• Wireless handsets
• Wide area power system
• Cell phones
• Precision auxiliary angle deflection measurement
• Signal demodulation
• Clock generation systems
• Test and instrumentation equipment