CDC2510BPWRG4

CDC2510BPWRG4 Overview

The Tape & Reel (TR) method is used for packaging clock ICs. In the 24-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result of this, we can find 24 terminations. To operate this time clock generator, 3.3V voltage should be applied. This clock generator receives its inputs from Clock, which is designed to be the clock source. Using 1 circuits, the electronic part's full performance can be accessed. This component can be conveniently installed on the panel thanks to the Surface Mount. It would take a maximum supply voltage of 3.6V to operate this time clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. There should be 3V~3.6V provided with this RF synthesizer. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. An electrical part such as this one can be classified as a PLL Clock Driver component. Microprocessor-specific clock PLL with 24 bits. Related electrical parts can be found for the base part number CDC2510. There are 24 pins on the frequency generators that are available for use. The maximum supply voltage that analog clock generator can handle is 3.3V. Clock PLL is configured with 10 output. At 0.2 ns Max, this clock generator offers low timing skew. Frequency generator is able to reali125MHze high efficiency when operating at a frequency of 125MHz.

CDC2510BPWRG4 Features

Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDC2510BPWRG4 Applications

There are a lot of Texas Instruments CDC2510BPWRG4 Clock Generators applications.

• Pagers
• CB radios
• Laptops
• High-speed communication applications
• Main oscillator in receiver
• Frequency synthesis
• Various decoding circuits
• VSAT (Small Ground Satellite Station)
• Closed circuit systems
• Infotainment systems