Products
Manufacturer
RFQ
NEWS
ContactCDC2510BPWR
3.3V PLL Clock Driver CDC2510 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 3V~3.6V Cut Tape (CT)
- Manufacturer: Texas Instruments
- NO: 815-CDC2510BPWR
- Package: 24-TSSOP (0.173, 4.40mm Width)
- Datasheet:
- Stock: 8952
- Description: 3.3V PLL Clock Driver CDC2510 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 3V~3.6V Cut Tape (CT) (Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10μA |
| Power Dissipation | 700mW |
| Quiescent Current | 10μA |
| Output Characteristics | SERIES-RESISTOR |
| Input | Clock |
| Ratio - Input:Output | 1:10 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | PLL Clock Driver |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Base Part Number | CDC2510 |
CDC2510BPWR Overview
As a clock IC, it uses the Cut Tape (CT) package. The 24-TSSOP (0.173, 4.40mm Width) package includes this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. There are a total of 24 terminations in this file. This electronic frequency generator requires a voltage of 3.3V. In this clock generator, Clock is used as the input to the clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock generator ic works with 3V~3.6V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. This electronic component can be classified as a PLL Clock Driver. Microprocessors are specifically designed to use this clock-generating IC, which has a 24-bit output. According to the base part number CDC2510, its related parts can be found. There are 24 pins on the frequency generators that are available for use. The supply voltage should be maintained at 3.3V for high efficiency. Clock PLL has 10 signal outputs to maximi10e output frequency. Low timing skew is provided by this analog clock generator at maximum 0.2 ns. High efficiency is achieved when operating at a frequency of 125MHz.
CDC2510BPWR Features
Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC2510BPWR Applications
There are a lot of Texas Instruments CDC2510BPWR Clock Generators applications.
- Instrument
- Integrated phase noise in aerospace systems
- Satellite navigation communication
- Microprocessor clock multipliers
- Bluetooth receivers
- PMR (Professional Mobile Radio)
- 10 Gigabit Ethernet
- Multi-function printers
- Automatic control system test
- CB radios
