CDC2351QDBR

CDC2351QDBR Overview

There is a case available for the cut smart buffer in 24-SSOP (0.209, 5.30mm Width). There is a Tape & Reel (TR) package attached to it. A total of 24 terminations are present. Supply voltages of 3.3V enable high efficiency. A mount of Surface Mount has been applied to it. There is a classification of Fanout Buffer (Distribution) for this electronic part. When the temperature is set to -40°C~125°C, reliable performance is ensured. With a 3V~3.6VV power source, it should work. This item is positioned in the way of Surface Mount. There are 24 pins on the clock buffer. In order for the timeing clock to operate, it is connected to the 24 pins. This is a member of the CDC2351 family. A cut smart buffer of this type is contained in Clock Drivers. There is 3.6V maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 3V in order for the clock divider to operate normally. As a default, it outputs 10. Electronic components of the Automotive, AEC-Q100 series are included in this package. For maximum efficiency, the supply voltage should be kept at 3.3V. The clock divider consumes 15mA quiescent current and is unaffected by external factors. As long as the frequency is set to 100MHz, excellent accuracy can be maintained. Using the TR packing method, this method is used.

CDC2351QDBR Features

24 terminations
The operating temperature of -40°C~125°C degrees
Clock Drivers subcategory
at 100MHz frequency

CDC2351QDBR Applications

There are a lot of Texas Instruments CDC2351QDBR Clock Buffers & Drivers applications.

• Patient diagnosis
• Information equipment
• DDR4 JEDEC standard LRDIMM design
• Other clock/data distribution
• Storage area network
• Clock signal duplication
• Zero crossing detector
• Peak detection
• Synchronous optical network (SONET)
• Furniture