CDC2351MDBREP

CDC2351MDBREP Overview

There is a case option of 24-SSOP (0.209, 5.30mm Width) available for this clock divider. Tape & Reel (TR) is the form in which it is packaged. A total of 24 terminations can be found in it. With a supply voltage of 3.3V, it is possible to achieve a high level of efficiency. The circuit clock is mounted on Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). To ensure reliable performance, the temperature should be set to -55°C~125°C. 3V~3.6V V power should work with it. It's in the way of Surface Mount. The pin count is 24. This IC divider operates on 24 pins. This is a member of the family of CDC2351. It is contained in Clock Driver. There is 3.6V maximum supply voltage (Vsup). Normal operation requires a voltage above 3V for the supply voltage (Vsup). As a default, it outputs 10. When the supply voltage is at 3.3V, the efficiency will be highest. It consumes 15mA quiescent current and is unaffected by external factors. As long as the frequency is 100MHz, excellent accuracy can be achieved. In this case, it uses TR packing.

CDC2351MDBREP Features

24 terminations
The operating temperature of -55°C~125°C degrees
Clock Driver subcategory
at 100MHz frequency

CDC2351MDBREP Applications

There are a lot of Texas Instruments CDC2351MDBREP Clock Buffers & Drivers applications.

• Clock signal level shifting
• High speed line receiver
• Gigabit Ethernet (GbE)
• High-end consumer electronics
• DDR4 JEDEC standard RDIMM design
• Data center
• Other PCIe Gen2 networking applications
• Mass storage system
• Measurement test
• Peak detection