CDC208DWRG4

CDC208DWRG4 Overview

The clock divider is packaged in a 20-SOIC (0.295, 7.50mm Width) case. There is a case available for the circuit clock in Tape & Reel (TR). A total of 20 terminations have been found in it. It is possible to achieve high efficiency with a 5V supply voltage. As a result, it will be mounted by Surface Mount in this case. This electronic part is classified as Fanout Buffer (Distribution). Setting the temperature to -40°C~85°C will ensure reliable performance. Any power source will work, as long as it has 4.5V~5.5VV. In this case, it is placed in the way of Surface Mount. There are 20 pins on the clock buffer. There is CMOS output from clock driver. In order for the timeing clock to operate, it is connected to the 20 pins. This is a member of the CDC208 family. This clock divider?is econtained in Bus Driver/Transceivers. It belongs to the family of electronic gadgets known as 208. By default, output 8 is set. There is a voltage supply of 5V volts for powering it. It is recommended that the supply voltage be kept at 5V for maximum efficiency. The clock divider consumes 8μA quiescent current, and it is unaffected by external factors. It maintains excellent accuracy at a frequency of 60MHz. This method entails the use of the TR packing method. As a result, it has a 4 bit configuration.

CDC208DWRG4 Features

20 terminations
The operating temperature of -40°C~85°C degrees
Bus Driver/Transceivers subcategory
at 60MHz frequency

CDC208DWRG4 Applications

There are a lot of Texas Instruments CDC208DWRG4 Clock Buffers & Drivers applications.

• Tower server
• Oscilloscope and logic analyzer front ends
• Consumer Electronics
• Handheld test instruments
• High speed industry
• High-performance workstation
• Clock signal format conversion
• Host bus adapter card
• High-end consumer electronics
• Measurement test