CD74HCT7046AMT

CD74HCT7046AMT Overview

As a clock IC, it uses the Tape & Reel (TR) package. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. Basically, this time clock generator needs a voltage of 5V. CMOS is designed for clock generator's input. With the Surface Mount, it is easy to install this electric component on the panel. There are 4.5V~5.5V available for use with this clock PLL. As determined by the test statistics, the ambient temperature should be set to -55°C~125°C. A Phase Lock Loop (PLL) is a classification for the electronic part in question. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. This part number is related to its related electronic parts. A 16 pin is available on the PLL. PLL clock can handle a voltage of 5V as its supply voltage. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. An electronic part belonging to the 74HCT series is being used here. Frequency generator is able to reali38MHze high efficiency when operating at a frequency of 38MHz. I would like to briefly introduce you to a 1-element frequency synthesizer that performs well with low jitter.

CD74HCT7046AMT Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 5V

CD74HCT7046AMT Applications

There are a lot of Texas Instruments CD74HCT7046AMT Clock Generators applications.

• CB radios
• Bit synchronization
• Telecommunication systems
• Closed circuit systems
• Vector network analyzers (VNA)
• Small signal recovery
• PCI express cards
• Precision auxiliary angle deflection measurement
• Bluetooth transmitters
• Televisions