CD74HC4046APWTE4

CD74HC4046APWTE4 Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. As part of the TSSOP package, this clock generator is embedded. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result, frequency synthesizers can be found to contain 16 terminations. Basically, this time clock generator needs a voltage of 3V. This clock generator receives its inputs from CMOS, which is designed to be the clock source. There are 1 circuits implemented in order to achieve full performance from this electronic part. This clock-based frequency generator provides a frequency up to 38MHz Max. In particular, this clock PLL is designed to be used with microprocessors. The clock PLL has 16 pins that are available. Featuring an impressive low-temperature operating performance and -55°C functions, this clock generator is sure to impress. The operating temperature should be lower than 125°C. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. A voltage of more than 6V will not be suitable for powering this clock generator. For this clock generator ic, 2V is the lowest allowable supply voltage. Frequency generator is able to reali18MHze high efficiency when operating at a frequency of 18MHz. It is classified as a PHASE LOCKED LOOP-electronic frequency generator since it is an analog IC.

CD74HC4046APWTE4 Features

Available in the TSSOP
Supply voltage of 3V

CD74HC4046APWTE4 Applications

There are a lot of Texas Instruments CD74HC4046APWTE4 Clock Generators applications.

• Telecommunication systems
• Ports
• Time to digital converters
• Vector network analyzers (VNA)
• Peripheral devices
• Microwave backhaul IF
• Integrated phase noise in aerospace systems
• Bit synchronization
• Signal demodulation
• Modems