CD74HC4046AMG4

CD74HC4046AMG4 Overview

Clock generator is packaged in the way of Tube. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 16 terminations can be found in frequency generators. A voltage of 3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be CMOS. The Surface Mount allows the electrical component to be installed conveniently on the panel. Approximately 6V is the maximum supply voltage needed by this time clock generator. This frequency synthesizer requires a supply voltage above 2V to be safe. There are 2V~6V different supply voltages that can be provided for this RF synthesizer. The temperature should be set at -55°C~125°C to ensure reliable performance. This is an electronic part that can be classified as a Phase Lock Loop (PLL) in this case. Clock PLL is equipped with 16 pin count. It is possible to find its related electronic parts by searching for the base part number 74HC4046. There is an available 16 pin on the PLL. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. 74HC series electronic parts are used in this part. By operating at a frequency of 38MHz, RF synthesizer is able to reali38MHze high efficiency. IC clock generator consists of 1 elements. It is recommended that the time clock generator's maximum supply current does not exceed 204mA.

CD74HC4046AMG4 Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3V

CD74HC4046AMG4 Applications

There are a lot of Texas Instruments CD74HC4046AMG4 Clock Generators applications.

• Local oscillator source in receiver
• Multi-function printers
• Smartphones
• Small signal recovery
• Antenna automatic tracking
• Space communucation
• PCI express cards
• Frequency synthesis
• Wi-Fi routers
• High-speed optical transport network (OTN)