Products
Manufacturer
RFQ
NEWS
ContactCD4053BPWG4
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Temperature Grade | MILITARY |
| Number of Channels | 3 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 720 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Dual, Single |
| Bandwidth | 30MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 2.5V |
| Dual Supply Voltage | 5V |
| Off-state Isolation-Nom | 40 dB |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Signal Current-Max | 0.01A |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 240Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Output | SEPARATE OUTPUT |
CD4053BPWG4 Overview
The electrical component comes in TSSOP packaging, which makes it convenient to ship overseas. Total terminations are 16. The electronic part provides high-quality output because it has 3 channels. With a 5V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. An switch multiplexer with 240Ohm internal resistance has a value of 240Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 20V. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 3V. For this digital switch to work, 80nA current would suffice. For this multiplexer, dual supply voltage is feasible, but it should not exceed 9V. When using dual power supplies, you should attach at least 2.5V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages range from 18V. It is possible to operate 6 inputs. It is possible to transfer data over a 30MHz-bandwidth. A temperature above 125°C is not suitable for operation of the analogue multiplexer.
CD4053BPWG4 Features
3 Channels
80nA Supply Current
Bandwidth: 30MHz
CD4053BPWG4 Applications
There are a lot of Texas Instruments CD4053BPWG4 Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Avionics test equipment
- Automotive applications
- RGB switches
- Fiber to the Home
- DVD-R
- ATM
- Fault Tolerant Systems
- Sample hold systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
