Products
Manufacturer
RFQ
NEWS
ContactCD4052BPWE4
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 240Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Power Supplies | 5/15V |
| Temperature Grade | MILITARY |
| Number of Channels | 2 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Number of Bits | 4 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 720 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Bandwidth | 25MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 2.5V |
| Off-state Isolation-Nom | 40 dB |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.01A |
| Length | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
CD4052BPWE4 Overview
Shipping overseas is convenient due to the electrical component's packing in TSSOP. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 2 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. There is 240Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 20V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 3V. For this digital switch to work, 80nA current would suffice. For this switch, a dual supply voltage is feasible, but it must not exceed 9VThe voltage should be at least 2.5V if you are using dual power supplies. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. Operating voltages range from 18V. Operating 8 inputs is required. There are various bandwidths available for data transfer. A temperature above 125°C is not suitable for operation of the analogue multiplexer. Its conductivity is 4-bit.
CD4052BPWE4 Features
2 Channels
80nA Supply Current
Bandwidth: 25MHz
4-Bit
CD4052BPWE4 Applications
There are a lot of Texas Instruments CD4052BPWE4 Analog Switches & Multiplexers ICs applications.
- Medical
- ISDN NT1/TA
- Video switching
- Relay replacements
- Cross Connects
- Sample hold systems
- Precision test equipment
- High reliability control systems
- ATM
- Channel Banks
