CD4046BPWR

CD4046BPWR Overview

Clock ICs are packaged using the Cut Tape (CT) method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 16 terminations in this file. A voltage of 10V should be applied to this electronic frequency generator. In this case, CMOS is designed to be the input of the clock generator. The frequency generator has a maximum frequency of 2.4MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Keeping the supply voltage for this frequency synthesizer above 5V is recommended for safety reasons. There are 3V~18V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -55°C~125°C, which is -55°C~125°C. It is possible to classify this electronic component as a Phase Lock Loop (PLL). An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The related electrical components for the base part number CD4046 can be found below. A 16 pin is available on the clock PLL. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. By operating at a frequency of 1.4MHz, frequency generator is able to achieve high efficiency. In this case, we have a 1-element clock PLL that performs well in the absence of jitter.

CD4046BPWR Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 10V

CD4046BPWR Applications

There are a lot of Texas Instruments
CD4046BPWR Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel