CD4046BEE4

CD4046BEE4 Overview

Tube-method packaging is used for clock ICs. There is a clock generator embedded in the 16-DIP (0.300, 7.62mm) package. It contains 16 terminations that can be found in frequency synthesizer. Basically, a voltage of 10V should be applied to this electronic frequency generator. CMOS is designed for clock generator's input. Thanks to the Through Hole, this electric component can easily be installed on a panel. It is safe to use this frequency synthesizer with a supply voltage above 5V. Clock generators should operate with the voltage supply of 3V~18V. The ambient temperature should be set at -55°C~125°C, which is estimated by the test statistics. It has been classified as a Phase Lock Loop (PLL) electronic part, which means that it is a semiconductor. Clock PLL is equipped with 16 pin count. The related electrical components for the base part number CD4046 can be found below. There is an available 16 pin on the clock generators. PLL or Frequency Synthesis Circuits-type frequency generators are usually classified as this type. When operated at 2.4MHz, frequency synthesizer achieves high efficiency. In this case, we are looking at a frequency generator with 1 elements that is low-jitter.

CD4046BEE4 Features

Available in the 16-DIP (0.300, 7.62mm)
Supply voltage of 10V

CD4046BEE4 Applications

There are a lot of Texas Instruments CD4046BEE4 Clock Generators applications.

• CPUs
• Digital HDTV systems
• HDD recorders
• Automatic test equipment
• Cable television converter boxes
• FM demodulation networks for FM operations
• Simple clock clean-up circuits
• Digital circuits
• Clock generation systems
• Deep space exploration