BU2624AF-E2

BU2624AF-E2 Overview

As a clock IC, it uses the Tape & Reel (TR) package. Clock PLL is embedded in the 20-SOIC (0.213, 5.40mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 20 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 5V is required. There is a Clock PLL called Clock, Crystal which is designed to be the input to this clock generator. To access the full performance of the electronic component, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 180MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. There is a maximum voltage of 6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 4V is recommended for safety reasons. There are 4V~6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. It's compatible with Clock logic levels. As far as this electronic part is concerned, it can be classified as a PLL Frequency Synthesizer component. This clock-generating IC is a 20-bit device designed explicitly for microprocessors. According to the base part number BU2624A, its related parts can be found. This clock generator can be classified as a kind of PLL or Frequency Synthesis Circuits in general.

BU2624AF-E2 Features

Available in the 20-SOIC (0.213, 5.40mm Width)
Supply voltage of 5V

BU2624AF-E2 Applications

There are a lot of ROHM Semiconductor BU2624AF-E2 Clock Generators applications.

• Electronic equipment
• Digital HDTV systems
• Coherent detection of the signal
• Closed circuit systems
• Pagers
• Broadcast communication
• Modems
• Wireless base station for LTE, LTE-advanced
• Satellite navigation communication
• Microwave radio