ASM3P2872AF-06OR

ASM3P2872AF-06OR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator is embedded in the SOT-23-6 Thin, TSOT-23-6 package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result, frequency synthesizers can be found to contain 6 terminations. For this clock generator ic, a voltage of 2.5V is required. A clock generator's input is called Crystal and it is designed as the input for this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. An upper frequency limit of 30MHz Max can be achieved with this clock-based frequency synthesizer. Because of the Surface Mount, clock PLL can be easily mounted on the panel. As long as you provide 2.375V~3.6V supply voltage, it will work. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of CMOS logic. Frequency Modulator, Spread Spectrum Clock Generator is the type of electrical part that this component is classified as. In particular, this clock PLL is designed to be used with microprocessors. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES WITH 3.3V SUPPLY.

ASM3P2872AF-06OR Features

Available in the SOT-23-6 Thin, TSOT-23-6
Supply voltage of 2.5V

ASM3P2872AF-06OR Applications

There are a lot of Rochester Electronics, LLC ASM3P2872AF-06OR Clock Generators applications.

• Integrated phase noise in aerospace systems
• Symbol synchronization
• Walkie-talkies
• Navigation, positioning and surveillance system for aircraft, ships and ships
• Closed circuit systems
• Frequency synthesis
• Ports
• PCI express cards
• Digital HDTV systems
• Remote telemetry and instrumentation