Products
Manufacturer
RFQ
NEWS
ContactADG1413YRUZ-REEL7
150ns, 120ns SPST - NO/NC 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1413 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)
- Manufacturer: Analog Devices Inc.
- NO: 84-ADG1413YRUZ-REEL7
- Package: 16-TSSOP (0.173, 4.40mm Width)
- Datasheet:
- Stock: 7157
- Description: 150ns, 120ns SPST - NO/NC 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1413 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Min Supply Voltage | 5V |
| Test Frequency | 1MHz |
| Operating Supply Current | 220μA |
| Power Dissipation | 4.97mW |
| Max Supply Current | 380μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 1.8Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 550pA |
| Channel Capacitance (CS(off), CD(off)) | 23pF 23pF |
| On-state Resistance Match-Nom | 0.13Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Insertion Loss (dB) | -0.35 dB |
| Charge Injection | -20pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 510ns |
| Switch-off Time-Max | 380ns |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.8Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 4.97mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1413 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 16.5V |
ADG1413YRUZ-REEL7 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. SPST - NO/NC switching circuits are used in these analog switch ics. Try searching for ADG1413 variants of the analog switch ic. Analog switches have 1.8Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. For this digital switch to work, 220μA current would suffice. A digital multiplexer may suffer damage if voltage is applied above 380μA. There is no problem with using dual supply voltage, but it should not exceed 16.5V. When using dual power supplies, you should attach at least 4.5V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. This electrical part is compatible with 12V operating voltages. The 4 inputs need to be operated in order to work. In 170MHz-bandwidths, data can be transferred.
ADG1413YRUZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NO/NC
220μA Supply Current
Bandwidth: 170MHz
ADG1413YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1413YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Cable Modem
- Automatic test equipment
- Optical Applications
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- New designs requiring multiplexer functions
- PDAs
- Battery Powered Instruments
- Multiplexers
- Automotive applications
