ADF4208BRU-REEL

ADF4208BRU-REEL Overview

This clock IC is packaged using the Tape & Reel (TR) method. In the 20-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 240 during reflowing. As you can see, it consists of 20 terminations. A voltage of 3V should be applied to this electronic frequency generator. CMOS is designed as this clock generator's input. RF synthesizers based on this clock provide frequencies up to 2GHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. Approximately 5.5V is the maximum supply voltage needed by this time clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 2.7V. As far as the supply voltage is concerned, clock PLL can be used with 2.7V~5.5V. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. Temperatures below -40°C could result in this clock PLL failing to start up. It's compatible with Clock logic levels. This electronic component can be classified as a Clock/Frequency Synthesizer (RF). Clock PLL is equipped with 20 pin count. This frequency synthesizer features DUAL MODULUS PRESCALER (RF): 32/33, 64/65 to produce better clock signals.

ADF4208BRU-REEL Features

Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V

ADF4208BRU-REEL Applications

There are a lot of Rochester Electronics, LLC ADF4208BRU-REEL Clock Generators applications.

• Line cards used in telephone exchange
• Wireless infrastructure
• Cell phones
• Clock generation systems
• Simple clock clean-up circuits
• High-frequency induction heating
• Closed circuit systems
• Signal modulation and demodulation
• Space communucation
• Microwave point-to-point systems