ADF4111BRU-REEL7

ADF4111BRU-REEL7 Overview

This clock IC is packaged using the Tape & Reel (TR) method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 240. There are 16 terminations found in the file. A voltage of 3V should be applied to this electronic frequency generator. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. There is a maximum frequency of 1.2GHz Max with this clock-based frequency generator. PLL clock is mounted in the way of Surface Mount. The maximal supply voltage (Vsup) reaches 5.5V. In order to maintain safety, this frequency generator should be supplied with voltages above 2.7V. Clock PLL works with 2.7V~5.5V supply voltage provided. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. A temperature of less than -40°C may cause this clock PLL to fail to start. This electronic component can be classified as a Clock/Frequency Synthesizer (RF). In particular, this clock PLL is designed to be used with microprocessors. This clock PLL features 6-BIT SWALLOW COUNTER for better clock signal output.

ADF4111BRU-REEL7 Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V

ADF4111BRU-REEL7 Applications

There are a lot of Rochester Electronics, LLC ADF4111BRU-REEL7 Clock Generators applications.

• Signal modulation and demodulation
• Carrier synchronization in wired communication
• Camera systems
• Ports
• Small signal recovery
• Wide area power system
• Clock signals to the high-speed Digital RF circuits
• Bluetooth transmitters
• Deep space exploration
• Closed circuit systems