ADF4110BRUZ-RL

As a clock IC, it uses the Tape & Reel (TR) package. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. In it, there are 16 terminations to be found. For this clock generator ic, a voltage of 3V is required. As the Clock PLL's input, CMOS, TTL is designed to be used in order to generate the clock signal. RF synthesizers based on this clock provide frequencies up to 550MHz maximum. Because of the Surface Mount, clock PLL can be easily mounted on the panel. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. As long as you provide 2.7V~5.5V supply voltage, it will work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. It's compatible with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Clock/Frequency Synthesizer (RF) component. It is a 16-bit IC that is designed for microprocessors specifically. You can find related electrical components to the base part number ADF4110. Clock generator is designed with 16 pins.  RF synthesizers can handle a voltage of 5V as the supply voltage.  In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. This clock PLL features 6-BIT SWALLOW COUNTER for better clock signal output. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs. Time clock generator requires a supply current of 4.5mA to fully function.

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V

There are a lot of Analog Devices Inc. ADF4110BRUZ-RL Clock Generators applications.