AD9517-1BCPZ

AD9517-1BCPZ Overview

It is packaged using the Tray method since it is a clock IC. The 48-VFQFN Exposed Pad, CSP package embeds this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 240. There are 48 terminations found in the file. A voltage of 3.3V should be applied to this electronic frequency generator. In this clock generator, CMOS, LVDS, LVPECL is used as the input to the clock. An upper frequency limit of 2.65GHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 3.465V of power. Keeping the supply voltage for this frequency synthesizer above 3.135V is recommended for safety reasons. As long as you provide 3.135V~3.465V supply voltage, it will work. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, LVDS, LVPECL logic levels. An electrical part such as this one can be classified as a Clock Generator, Fanout Distribution component. There is a 48-bit clock-generating IC built specifically for microprocessors in this frequency generator. This clock generator offers low timing skew at 0.675 ns Max. By searching for the 9517 family, it is possible to find similar electrical components.

AD9517-1BCPZ Features

Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V

AD9517-1BCPZ Applications

There are a lot of Rochester Electronics, LLC AD9517-1BCPZ Clock Generators applications.

• CB radios
• Coherent carrier tracking
• Simple clock clean-up circuits
• CPUs
• Reference signals to RF systems
• FSK demodulators
• Tracking filters
• Signal frequency synthesis circuits
• Communication infrastructure
• Digital switching systems