AC1226

AC1226 Overview

Materials from Tube are used in its packaging.For the purpose of saving space, the 8-DIP (0.300, 7.62mm) package is used.Since it is a type of Thermocouple Conditioner, it is capable of providing superior performance.Sensor and detector interface is mounted using the Through Hole technique.In order to avoid unnecessary cooling, the operating temperature should be maintained at 0°C~70°C.As an input type, Voltage is used.A 8 termination is used to prevent signals from reflecting off the transmitter end of the cable.Based on its base part number, AC1226G, related electronic parts can be found.An array of 1 functions has been configured.As long as the supply voltage is 5V, it will operate.Essentially, it is a 8-pin electronic device.There are specific purposes for the pins of the 8 component.In Through Hole, it is mounted.This program uses the output type Thermocouple.If the operating supply current is maintained at 80μA, efficiency can be improved.The supply voltage will be exceeded by 36V and failures will occur.Sensor and detector interface is likely that the supply voltage will be below 4V when failure occurs.

AC1226 Features

With 5V channels
operate temperature at the range of 80μA

AC1226 Applications

There are a lot of Analog Devices Inc. AC1226 applications of sensor and detector interfaces.

• Security system intrusion detection
• Heating and air-conditioning
• Transducers and Transmitters
• Automatic Lighting (Residential and Commercial)
• Collision-Avoidance for Drones, Robots and
• Mobile Devices
• Strain Gauges
• Generator/alternator monitoring and control
• Intrusion Detection
• Large Tank Level Sensing