9112BM-17LFT

9112BM-17LFT Overview

Clock ICs are packaged using the Tape and Reel method. Embedded in the SOIC package is this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. 16 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Providing a maximum frequency of 133MHz, this clock-based RF synthesizer is suitable for a variety of applications. There is a 16 pin that is available on the frequency synthesizers. There are 0°C operations that can be performed on this clock generator, which has impressive low-temperature performance. It is possible for the clock generator ic to work at 70°C with a reduced performance. The RF synthesizer features ALSO OPERATES AT 5V SUPPLY VOLTAGE for improved clock signal output. At 0.25 ns Max, this analog clock generator exhibits low timing skew. There are 8 pins that are configured to enable high true output on this analog clock generator. A voltage exceeding 5.5V is not acceptable for supply to this frequency generator. This RF synthesizer can operate at a voltage as low as 2.97V.

9112BM-17LFT Features

Available in the SOIC
Supply voltage of 3.3V
8 true outputs

9112BM-17LFT Applications

There are a lot of Integrated Device Technology (IDT) 9112BM-17LFT Clock Generators applications.

• Signal frequency synthesis circuits
• Microwave radio
• FSK demodulators
• High-frequency induction heating
• Navigation, positioning and surveillance system for aircraft, ships and ships
• Signal modulation and demodulation
• Radio receivers
• Clock synchronization
• Wireless infrastructure
• Automatic control