9112BF-17LFT

9112BF-17LFT Overview

As a clock IC, PLLs is packaged using the Tape and Reel method. There is a clock generator embedded in the QSOP package. This clock generator will sustain a maximum temperature of 260 when reflown. There are 16 terminations found in this file. This time clock generator should be voltaged at 3.3V. The input of this clock generator is designed to be Clock. 1 circuits are implemented to access the electronic component's full performance. It provides a maximum frequency of 133MHz. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. There is a 16 pin that is available on the frequency synthesizers. The operating temperature should be higher than 0°C. At 70°C, this RF synthesizer remains functional despite reduced performance. ALSO OPERATES AT 5V SUPPLY VOLTAGE is included in this frequency generator to enhance clock signal output. The maximal same edge skew (tskwd) can not be exceeded. A analog clock generator with 8 true output enable pins is configured for this application. It is unacceptable to supply this clock PLL with a voltage higher than 5.5V. There is a maximum supply voltage of 2.97V for this RF synthesizer.

9112BF-17LFT Features

Available in the QSOP
Supply voltage of 3.3V
8 true outputs

9112BF-17LFT Applications

There are a lot of Integrated Device Technology (IDT) 9112BF-17LFT Clock Generators applications.

• Pagers
• Ports
• PCI express cards
• Local oscillators (LOs)
• Frequency synthesis
• Set-top boxes
• DVD add-on cards for multimedia PCs
• Local oscillator source in receiver
• Microwave radio
• Mixed mode (analog and digital) applications