8745BYLFT

8745BYLFT Overview

As a clock IC, it uses the Tape and Reel package. A Clock PLL is included with the LQFP package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 32 terminations in this file. This clock generator ic should receive a voltage of 3.3V. The input of this clock generator is designed to be LVDS. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 700MHz Max can be achieved with this clock-based frequency synthesizer. It is a 32-bit clock PLL designed specifically for microprocessors. There are 32 pins on the frequency generator that are available for use. The operating temperature should be higher than 0°C. The RF synthesizer can still operate at 70°C with attenuated performance. There is a maximum supply voltage of 3.3V that clock generator can handle. Fundamentally, this is a kind of Clock Drivers clock PLL. The timing skew of this frequency synthesizer is low at 0.035 nsmax. 5 pins are configured for high true output enable in this clock generator. The 8745 family of parts can be used to find electric parts that are similar to each other. A voltage of more than 3.465V will not be suitable for powering this clock generator. The lowest limit of supply voltage for this RF synthesizer is 3.135V. The logic IC PLL clock adopts is PLL BASED CLOCK DRIVER.

8745BYLFT Features

Available in the LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5 true outputs

8745BYLFT Applications

There are a lot of Integrated Device Technology (IDT) 8745BYLFT Clock Generators applications.

• Radio receivers
• Smartphones
• Signal frequency synthesis circuits
• Carrier synchronization in wired communication
• Mechanical devices
• PCI express cards
• High-frequency induction heating
• Wi-Fi routers
• Set-top boxes
• Computers to manage memory cards