8701AY-01LFT

8701AY-01LFT Overview

Clock generator is packaged in the way of Tape & Reel. As part of the TQFP package, this clock generator is embedded. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. It contains 48 terminations that can be found in frequency synthesizer. Clock generator ics require a voltage of 3.3V. LVTTL is designed as this clock generator's input. There are 1 circuits implemented in order to achieve full performance from this electronic part. The frequency generator has a maximum frequency of 250MHz. The clock-generating IC is a 48-bit device designed specifically for microprocessors. The clock PLL has 48 pins that are available. Electronic frequency generator can operate at low temperatures and can perform 0°C operations at a time. The operating temperature should be lower than 70°C. Time clock generator is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. There is a low timing skew at 0.3 nsmax with this RF synthesizer. Analog clock generator is configured with 15 pins that enable the high true output. This clock generator cannot be powered by voltages higher than 3.465V. For this clock generator ic, 3.135V is the lowest allowable supply voltage. In LOW SKEW CLOCK DRIVER logic circuits, this electronic frequency generator is used primarily as a clock component.

8701AY-01LFT Features

Available in the TQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
15 true outputs

8701AY-01LFT Applications

There are a lot of Integrated Device Technology (IDT) 8701AY-01LFT Clock Generators applications.

• Bluetooth receivers
• PCI express cards
• Tracking filters
• Signal analyzer
• Frequency shifting decodes
• Cell phones
• Bluetooth transmitters
• Laptops
• Signal demodulation
• Walkie-talkies