8634BY-01LFT

8634BY-01LFT Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. Clock PLL is embedded in the LQFP package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are a total of 32 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. The input of this clock generator is designed to be LVDS. A total of 1 circuits are implemented to access the full performance of the electrical part. An up to 700MHz frequency is provided by this clock-based RF synthesizer. There is a maximum voltage of 3.465V for this clock generator. There is a 32-bit clock-generating IC built specifically for microprocessors in this frequency generator. There are 32 pins on the frequency generators that are available for use. Despite its low-temperature operation, this clock generator ic is capable of 0°C operations. There is even a possibility that this clock generator ic will last even when the temperature is 70°C. There is a maximum supply voltage of 3.3V that clock generator can handle. And basically, this clock generator is often classified as a kind of Clock Drivers. The timing skew of this frequency synthesizer is low at 0.025 nsmax. 5 pins enable the digital clock generator's true output. By searching for parts that belong to the 8634 family, you can find electronic parts that are similar. This electronic frequency generator is mainly used to make up PLL BASED CLOCK DRIVER logic circuits.

8634BY-01LFT Features

Available in the LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5 true outputs

8634BY-01LFT Applications

There are a lot of Integrated Device Technology (IDT) 8634BY-01LFT Clock Generators applications.

• Coherent detection of the signal
• Local oscillator source in receiver
• Broadcast communication
• Pulsed digital systems
• Microprocessor clock multipliers
• Clock synchronization
• FMCW Radar
• Infotainment systems
• Notebooks
• Quenching?