8442AKI-90LF

8442AKI-90LF Overview

Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 32 terminations. The clock generator ic should be grounded with a voltage of 3.3V. This Clock PLL will be fed by Crystal as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 700MHz is available. There are CLOCK GENERATOR, OTHER uPs/uCs/Peripheral ICs integrated into this digital clock generator. There is a 32-bit clock-generating IC built specifically for microprocessors in this frequency generator. The frequency synthesizer has 32 pins that are available. There are -40°C operations that can be performed on this clock generator, which has impressive low-temperature performance. This RF synthesizer can last with attenuated performance at 85°C. In terms of the supply voltage, analog clock generator can handle 3.3V volts. The device is usually classified as a type of Clock Generators device. This clock generator cannot be powered by voltages higher than 3.465V. This RF synthesizer can operate at a voltage as low as 2.975V.

8442AKI-90LF Features

Supply voltage of 3.3V
Operating supply voltage of 3.3V

8442AKI-90LF Applications

There are a lot of Integrated Device Technology (IDT) 8442AKI-90LF Clock Generators applications.

• Precision auxiliary angle deflection measurement
• Televisions
• Electronic countermeasures
• Bluetooth transmitters
• Line cards used in telephone exchange
• Medical equipment
• Satellite receivers
• Automatic control system test
• Local oscillator source in receiver
• Integrated phase noise in aerospace systems