843031AGLFT

843031AGLFT Overview

Clock ICs are packaged using the Tape and Reel method. A Clock PLL is included with the TSSOP package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. There are 8 terminations found in this file. The clock generator ic should be grounded with a voltage of 3.3V. The input of this clock generator is designed to be Crystal. Using 1 circuits, the electronic part's full performance can be accessed. It provides a maximum frequency of 350MHz. There are CLOCK GENERATOR, OTHER uPs/uCs/Peripheral ICs integrated into this digital clock generator. In particular, this clock PLL is designed to be used with microprocessors. A 8 pin is available on the clock PLL. In addition to having an impressive low-temperature performance, this clock device can perform 0°C operations simultaneously. With attenuated performance, this RF synthesizer can survive at 70°C. There is a maximum supply voltage of 3.3V that clock generator can handle. Clock Generators-type frequency generators are usually classified as this type. There is no point in supplying this frequency generator with a voltage higher than 3.465V. The lowest limit of supply voltage for this RF synthesizer is 3.135V.

843031AGLFT Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

843031AGLFT Applications

There are a lot of Integrated Device Technology (IDT) 843031AGLFT Clock Generators applications.

• Main oscillator in receiver
• Antenna automatic tracking
• Wi-Fi routers
• Automatic test equipment
• Wide area power system
• Radiotelephones
• HDD recorders
• Set-top boxes
• Remote telemetry and instrumentation
• Simple clock clean-up circuits