843002AGI-01LFT

843002AGI-01LFT Overview

As a clock IC, PLLs is packaged using the Tape & Reel method. In the TSSOP package, there is an embedded clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As you can see, it consists of 20 terminations. The supply voltage of 2.5V allows for high efficiency. Crystal is designed as this clock generator's input. To access the electronic component's full performance, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 170MHz maximum. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, OTHER. It is a 20-bit clock PLL designed specifically for microprocessors. There are a number of 20 pins that are available on the clock generators. The operating temperature should be higher than -40°C. The RF synthesizer can still operate at 85°C with attenuated performance. Clock generator can also be included into Clock Generators. The RF synthesizer features ALSO OPERATES AT 3.3V SUPPLY for improved clock signal output. This clock generator cannot be powered by voltages higher than 3.63V. For this clock generator ic, 2.375V is the lowest allowable supply voltage.

843002AGI-01LFT Features

Available in the TSSOP
Supply voltage of 2.5V

843002AGI-01LFT Applications

There are a lot of Integrated Device Technology (IDT) 843002AGI-01LFT Clock Generators applications.

• Satellite navigation communication
• Ultrasound diagnosis
• DVD add-on cards for multimedia PCs
• Time to digital converters
• Various decoding circuits
• Electronic equipment
• Cellular/4G
• High-frequency induction heating
• Mechanical devices
• VSAT (Small Ground Satellite Station)