74FCT388915TCJG8

74FCT388915TCJG8 Overview

As a clock IC, PLLs is packaged using the Tape and Reel method. The PLCC package contains this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains a total of 28 terminations within RF synthesizer. This time clock generator should be voltaged at 3.3V. In this clock generator, LVTTL is used as the input to the clock. To access the electronic component's full performance, 1 circuits are implemented. An up to 100MHz frequency is provided by this clock-based RF synthesizer. It is a 28-bit IC that is designed for microprocessors specifically. The frequency generator is equipped with 28 pins. Despite its low-temperature operation, this clock generator ic is capable of 0°C operations. At 70°C, this RF synthesizer remains functional despite reduced performance. This time clock generator can handle a voltage of 3.3V as its supply voltage. Clock Drivers-type frequency generators are usually classified as this type. The timing skew of this frequency synthesizer is low at 0.8 nsmax. Analog clock generator is configured with 7 pins that enable the high true output. When searching for parts of the FCT family, similar frequency generators will be found. A voltage of more than 3.6V will not be suitable for powering this clock generator. PLLs have a minimum supply voltage limit of 3V. In PLL BASED CLOCK DRIVER logic circuits, this electronic frequency generator is used primarily as a clock component.

74FCT388915TCJG8 Features

Available in the PLCC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
7 true outputs

74FCT388915TCJG8 Applications

There are a lot of Integrated Device Technology (IDT) 74FCT388915TCJG8 Clock Generators applications.

• Set-top boxes
• Digital HDTV systems
• Time to digital converters
• GPS systems
• DVD add-on cards for multimedia PCs
• VSAT (Small Ground Satellite Station)
• Jitter reduction
• DVD recorders
• Local oscillator source in receiver
• Wi-Fi routers