728MLFT

728MLFT Overview

A clock integrated circuit is packaged in a Tape and Reel-shaped package because it is for use as a clock. Clock PLL is embedded in the SOIC package. Frequency generator can maintain a maximum temperature of NOT SPECIFIED under reflowing conditions. There are 8 terminations found in the file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by Crystal as its input. For full access to the electronic component's capabilities, 1 circuits are implemented. An upper frequency limit of 27MHz Max can be achieved with this clock-based frequency synthesizer. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, OTHER. In particular, this clock PLL is designed to be used with microprocessors. There are a number of 8 pins that are available on the clock generators. Despite its low operating temperature, this clock generator has 0°C operations. The RF synthesizer can still operate at 70°C with attenuated performance. There is a maximum supply voltage of 3.3V that frequency generators can handle. A voltage exceeding 3.45V is not acceptable for supply to this frequency generator. Clock PLL operates with the minimal supply voltage of 3.15V.

728MLFT Features

Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V

728MLFT Applications

There are a lot of Integrated Device Technology (IDT) 728MLFT Clock Generators applications.

• PMR (Professional Mobile Radio)
• Signal generator
• Wide area power system
• Carrier synchronization in wired communication
• Bluetooth transmitters
• Phase modulation cellular systems
• GPS systems
• Jitter reduction
• Line cards used in telephone exchange
• Small signal recovery