672M-02LFT

672M-02LFT Overview

As a clock IC, it uses the Tape and Reel package. Embedded in the SOIC package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains 16 terminations that can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by Clock as its input. Using 1 circuits, the electronic part's full performance can be accessed. An upper frequency limit of 135MHz Max can be achieved with this clock-based frequency synthesizer. In particular, this clock PLL is designed to be used with microprocessors. There are 16 pins that are available on the frequency generator. Despite its low-temperature operation, this clock generator ic is capable of 0°C operations. There is still a possibility of the electronic frequency generator working at 70°C with attenuated performance. This time clock generator can handle a voltage of 3.3V as its supply voltage. Low timing skew is offered by this RF synthesizer at maximum 0.3 ns. 4 high true output enable pins are available on this clock generator. A search for the 672 family will yield similar electronic components. It is unacceptable to supply this clock PLL with a voltage higher than 5.5V. Powered by 3.13V, this clock generator has the lowest supply voltage limit.

672M-02LFT Features

Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs

672M-02LFT Applications

There are a lot of Integrated Device Technology (IDT) 672M-02LFT Clock Generators applications.

• GPS systems
• Various decoding circuits
• Microwave backhaul IF
• Notebooks
• Satellite receivers
• Radar
• Bit synchronization
• Motor speed controls
• Clock recovery
• Communication infrastructure