650R-01LF

650R-01LF Overview

Clock PLL is embedded in the QSOP package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. 20 terminations can be found in frequency generators. A voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed as this clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 66.67MHz maximum. Microprocessor-specific clock PLL with 20 bits. The frequency generator is equipped with 20 pins. Designed to operate at low temperatures, this frequency generator performs 0°C operations per second. There is even a possibility that this clock generator ic will last even when the temperature is 70°C. There is a maximum supply voltage of 3.3V that frequency generators can handle. 8 signal outputs maximi8e the output frequency. This clock generator cannot be powered by voltages higher than 5.5V. With this clock generator, the supply voltage is limited to 3V. This time clock generator requires a supply current of 50mA in order to operate properly.

650R-01LF Features

Available in the QSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

650R-01LF Applications

There are a lot of Integrated Device Technology (IDT) 650R-01LF Clock Generators applications.

• Microprocessor clock multipliers
• Antenna automatic tracking
• Digital switching systems
• Bluetooth receivers
• Satellite receivers
• DVD recorders
• Peripheral devices
• Medical equipment
• FM demodulation networks for FM operations
• Microwave radio