601G-01LF

601G-01LF Overview

There is a clock generator embedded in the TSSOP package. This clock generator ic can sustain NOT SPECIFIED degrees of temperature during reflowing. 16 terminations can be found in frequency generators. Clock generator ics require a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock. Using 1 circuits, the electronic part's full performance can be accessed. There is a maximum frequency of 156MHz Max with this clock-based frequency generator. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. There is a 16 pin that is available on the digital clock generator. The operating temperature should be higher than 0°C. Despite its attenuated performance, this frequency synthesizer can last at 70°C. Supply voltage 5V is what clock generator can handle. The output frequency is magnified as high as possible with 2 signal outputs. There can be no voltage higher than 5.5V when powering this frequency generator. PLLs have a minimum supply voltage limit of 3V. For the clock time generator to function properly, 22mA of supply current must be provided. Elemental destruction can occur when the supply current is exceeded (higher than 30mA)

601G-01LF Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 5V

601G-01LF Applications

There are a lot of Integrated Device Technology (IDT) 601G-01LF Clock Generators applications.

• PMR (Professional Mobile Radio)
• Automatic control
• VSAT (Small Ground Satellite Station)
• Signal generator
• Carrier synchronization in wired communication
• Radar
• Microwave backhaul IF
• Reference signals to RF systems
• Small signal recovery
• Radio receivers