5V49EE502NLGI

5V49EE502NLGI Overview

The QFN package includes this clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. In it, there are 24 terminations to be found. This electronic frequency generator requires a voltage of 3.3V. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. Providing a maximum frequency of 50MHz, this clock-based RF synthesizer is suitable for a variety of applications. It is a 24-bit clock PLL designed specifically for microprocessors. There are a number of 24 pins that are available on the frequency synthesizers. In addition to having an impressive low-temperature performance, this clock device can perform -40°C operations simultaneously. The operating temperature should be lower than 85°C. Supply voltage 3.3V is what clock generator can handle. Clock PLL has 6 signal outputs to maximi6e output frequency. At maximum 0.075 ns, this analog clock generator has low timing skew. The 5V family of parts can be used to find electric parts that are similar to each other. To supply this clock PLL, a voltage higher than 3.465V is unacceptable. The lowest limit of supply voltage for this RF synthesizer is 3.135V. Logic circuits that use PLL BASED CLOCK DRIVER logic are composed of this analog clock generator. A supply current of 68mA is required to fully operate clock PLL.

5V49EE502NLGI Features

Available in the QFN
Supply voltage of 3.3V
Operating supply voltage of 3.3V

5V49EE502NLGI Applications

There are a lot of Integrated Device Technology (IDT) 5V49EE502NLGI Clock Generators applications.

• FSK demodulators
• Bit synchronization
• Microwave radio
• GPS systems
• Coherent carrier tracking
• Electronic equipment
• Set-top boxes
• Multi-function printers
• Small signal recovery
• Integrated phase noise in aerospace systems