581G-01ILFT

581G-01ILFT Overview

The Tape and Reel method is used for packaging clock ICs. Clock PLL is embedded in the TSSOP package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 16 terminations in this file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed for clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 200MHz is available. It is a 16-bit IC that is designed for microprocessors specifically. There are 16 pins on the frequency generators that are available for use. There are -40°C operations that can be performed on this clock generator, which has impressive low-temperature performance. The RF synthesizer can still operate at 85°C with attenuated performance. PLL clock can handle a voltage of 3.3V as its supply voltage. At 0.25 ns Max, this clock generator offers low timing skew. 4 pins are configured for high true output enable in this clock generator. This PLL belongs to the family of 581. In order to supply this clock PLL, a voltage greater than 5.5V is not acceptable. This RF synthesizer can operate at a voltage as low as 3V.

581G-01ILFT Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs

581G-01ILFT Applications

There are a lot of Integrated Device Technology (IDT) 581G-01ILFT Clock Generators applications.

• Walkie-talkies
• Radio receivers
• Coherent detection of the signal
• DVD recorders
• Frequency Modulation (FM) stereo decoders
• Ultrasound diagnosis
• VSAT (Small Ground Satellite Station)
• Signal generator
• Bit synchronization
• Pulsed digital systems