552ARI-01LF

552ARI-01LF Overview

Rail/Tube-method packaging is used for clock ICs. As part of the QSOP package, this clock generator is embedded. The frequency generator is capable of withstanding a maximum temperature of NOT SPECIFIED during reflowing. As a result of this, we can find 20 terminations. This clock generator ic should receive a voltage of 3.3V. A clock generator's input is called Clock and it is designed as the input for this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Providing a maximum frequency of 200MHz, this clock-based RF synthesizer is suitable for a variety of applications. There is a 20-bit clock-generating IC built specifically for microprocessors in this frequency generator. There is a 20 pin that is available on the frequency synthesizers. Featuring an impressive low-temperature operating performance and -40°C functions, this clock generator is sure to impress. There is even a possibility that this clock generator ic will last even when the temperature is 85°C. Clock PLL is configured with 8 output. There can be no voltage higher than 5.5V when powering this frequency generator. Powered by 3V, this clock generator has the lowest supply voltage limit. For its full function, a supply current of 59mA is required.

552ARI-01LF Features

Available in the QSOP
Supply voltage of 3.3V

552ARI-01LF Applications

There are a lot of Integrated Device Technology (IDT) 552ARI-01LF Clock Generators applications.

• 1 Gigabit Ethernet
• Peripheral devices
• CB radios
• Multi-function printers
• High-frequency induction heating
• Modems
• Picocells, femtocells and small cells
• Clock synchronization
• DVD recorders
• Communication infrastructure