525R-02LF

525R-02LF Overview

As part of the QSOP package, this clock generator is embedded. When reflowed, this frequency generator can withstand a maximum temperature of 260. 28 terminations can be found in frequency generators. For this clock generator ic, a voltage of 3.3V is required. This clock generator receives its inputs from Clock, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. The frequency generator has a maximum frequency of 250MHz. In particular, this clock PLL is designed to be used with microprocessors. There is a 28 pin that is available on the digital clock generator. Despite its low operating temperature, this clock generator has 0°C operations. The operating temperature should be lower than 70°C. There is a maximum supply voltage of 5V that clock generator can handle. The output frequency can be magnified as high as possible with the assistance of 2 signal outputs. To supply this clock PLL, a voltage higher than 5.5V is unacceptable. For this clock generator ic, 3V is the lowest allowable supply voltage. A supply current of 8mA is required to fully operate clock PLL.

525R-02LF Features

Available in the QSOP
Supply voltage of 3.3V
Operating supply voltage of 5V

525R-02LF Applications

There are a lot of Integrated Device Technology (IDT) 525R-02LF Clock Generators applications.

• Quenching?
• Symbol synchronization
• Bluetooth receivers
• Integrated phase noise in aerospace systems
• DVD add-on cards for multimedia PCs
• Fiber Channel
• Phase modulation cellular systems
• Signal demodulation
• Deep space exploration
• FMCW Radar