525-01RILF

525-01RILF Overview

QSOP contains this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains 28 terminations that can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. It provides a maximum frequency of 140MHz. In this IC, a 28-bit frequency generator is designed specifically for use in microprocessors. The clock PLL has 28 pins that are available. Despite its low-temperature operation, this clock generator ic is capable of -40°C operations. With attenuated performance, this RF synthesizer can survive at 85°C. The output frequency can be magnified as high as possible with the assistance of 2 signal outputs. There is no point in supplying this frequency generator with a voltage higher than 5.5V. This clock generator ic requires a voltage supply no lower than 3V. For the clock time generator to function properly, 8mA of supply current must be provided.

525-01RILF Features

Available in the QSOP
Supply voltage of 3.3V

525-01RILF Applications

There are a lot of Integrated Device Technology (IDT) 525-01RILF Clock Generators applications.

• Signal generator
• Small signal recovery
• Cellular/4G
• Signal analyzer
• Bluetooth transmitters
• HDD recorders
• Reference signals to RF systems
• Radar
• Test equipment
• Melting